FAQ
Frequently Asked Questions
What does paver sealing cost in Largo?
Rusty's Pro Wash & Seal, a Largo company, lists $1.00 to $1.75 per square foot for a full clean, sand and seal. That puts a 600 square foot driveway near $600 to $1,050. The company says pool decks and jobs that strip old sealer or restore color fall toward the high end. For a price on your own pavers, ask for a free estimate.
Can old pavers be restored?
Often, yes. Faded color, green growth and empty joints are usually fixed with a wash, fresh sand and a new coat. A coat that has turned hazy or white has to be stripped first. A Tampa Bay company says routine cleaning and sealing runs $1,000 to $3,000, while waiting until pavers fall apart can push repairs to $3,000 or more. To have a surface looked at, call (727) 610-7187.
How often should I seal pavers in Florida?
Plan on every two to five years. Rusty's calls two to four years typical in Pinellas County, Premier Coatings says two to three, and Unilock, a paver maker, says many owners reseal every three to five. Sun, shade and traffic decide where your pavers land. Pour a little water on the surface: if it sinks in instead of rolling into beads, the coat is spent. To have yours checked, call (727) 610-7187.
How much does it cost to restore pavers?
It depends on how far the surface has gone. A Tampa Bay company lists major restoration at $3,000 to $8,000 or more, against $1,000 to $3,000 for routine cleaning and sealing. Failed old sealer must be stripped first, which pushes a Largo job toward the high end of $1.00 to $1.75 per square foot. To see where yours falls, ask for a free estimate.
Who seals pavers in Largo, FL?
A local contractor who serves Largo and the other places listed on this site does the work, and you will hear back within 1 business day, usually much sooner. The estimate is free. To reach a contractor, call (727) 610-7187.
Is it worth sealing a pool deck in Largo?
Often, with a finish picked for footing. Unilock says a high sheen can turn slippery when wet, while a penetrating matte keeps traction, and Rusty's says it builds a slip-resistant additive into every pool deck seal. Ask which finish a contractor would use around your pool. To have a deck looked at, ask for a free estimate.
What do professionals use to seal pavers?
Most use a water-based or a solvent-based product, applied by pump sprayer, by roller or by both together. Rusty's, a Largo company, says it uses a water-based urethane sealer and a pressurized pump rig, and Unilock lists a low-pressure sprayer or a roller the sealer maker specifies. Ask the contractor which product and tool go on your surface.
Is it better to spray or roll paver sealer?
Many contractors do both. Unilock says an application sprayer helps lay an even coat and prevents lap marks, and a dry roller soaks up pooled sealer to stop streaks and drips. Even coverage matters more than the tool.
Contact Us Today for a Free Estimate
A contractor who serves your area can answer any other question.
Free, no obligation
