Click To Call(727) 610-7187Click To Get A Free Estimate
Sealed red brick pavers in a herringbone pattern outside a Largo home

Warm brick color that holds up

Brick Paver Sealing in Largo, FL

Call (727) 610-7187 to get a free estimate on sealing your Largo brick pavers.

  • Brings out deeper paver color
  • Fresh joint sand helps lock pavers in place
  • Gives weeds less room to grow
  • Makes the surface easier to keep clean
  • Free estimate, no obligation

Request a Free Estimate

Free, no obligation.

Step 1 of 2

Where are your pavers?

Please choose one.

Free EstimateNo obligation
Fast ReplyWithin 1 business day, usually much sooner
Typical Local Price$1.00 to $1.75 a sq ft to clean, sand and seal
Call Now(727) 610-7187
Brick pavers

Do you serve brick pavers in Largo, and how soon is a reply?

A local contractor takes brick paver jobs across Largo, and a reply comes within 1 business day, usually much sooner. A visit and a price cost nothing, and nobody expects a yes. To ask now, call (727) 610-7187.

Brick can look gray, patchy or green after a few damp summers, even though the color is baked into the paver. Cleaning brings the red back, and sand and sealer help keep it. A contractor who knows the difference between clay and concrete brick can choose the right product. Tell the contractor what your brick looks like when you ask for a free estimate.

Call (727) 610-7187

Is my paver clay brick or concrete, and does sealing change?

It can. Wikipedia explains that clay brick is fired in a kiln, while concrete brick sets and is a porous form of brick. Rusty's Tampa Bay guide says brick needs clay-formulated products, and the Largo page lists brick, concrete and travertine as surfaces. A contractor can look at the edge of one paver and tell. To start that conversation, call (727) 610-7187.

Many homeowners do not know which they have, and that is fine. Mention when the patio or drive was built and what the pavers looked like when new. Photos of an edge help too, so ask how to ask for a free estimate.

Two contractors laying sealer across a brick paver terrace with a roller and a sprayer

Does brick handle Florida better than poured concrete?

Premier Coatings says brick pavers can handle Florida's climate better than poured concrete, with one condition: they have to be cleaned, re-sanded and sealed on schedule. In Pinellas County that schedule is every two to three years, and closer to two where sun and salt spray hit. The material helps, and the upkeep finishes the job. To plan the upkeep, call (727) 610-7187.

Salt and moisture drive fading and loose joints, Premier says, and loose joints invite weeds, ants and trip hazards. Largo sits between the Intracoastal Waterway and Tampa Bay, so no yard is far from damp air. To see how yours is holding up, ask for a free estimate.

What's included

What does the brick paver sealing process include?

Premier Coatings lists seven steps, and a Largo job tends to follow them closely. A contractor can go over each one when you call (727) 610-7187.

Wash and algaecide

Dirt comes off with a deep clean, and an algaecide goes on before a thorough rinse.

Sand the joints

Premier says polymeric sand is often used, and Pro Paver Clean and Seal fills joints to about an eighth to a quarter inch below the chamfer edge.

Mask and check

Edges and plants get protected, and a moisture check comes before the sealer.

Flood coat

A heavy coat of sealer goes on dry brick, one of the final steps in Premier's list.

What sealer finish suits brick: natural, satin or wet look?

Natural leaves brick looking like brick. Premier Coatings calls natural or matte a minimal sheen with strong protection, satin a soft sheen that adds color depth and gloss the most color depth where grip can be kept. Rusty's offers four levels and says high gloss is the wet look. Red brick can look deep and rich with gloss, but a steady matte look suits many older homes. To see samples against your brick, ask for a free estimate.

Pro Paver Clean and Seal sells a sealer that is not glossy and says that avoids the milky spots trapped moisture can leave. Paver Sealing Pinellas names Trident Protects sealers. Ask which brand and sheen a contractor would use on your brick. To compare, call (727) 610-7187.

Pricing

How much does brick paver sealing cost in Largo?

No page lists a price for brick alone. Rusty's Pro Wash & Seal gives $1.00 to $1.75 per square foot in Largo for a clean, sand and seal, and its Tampa Bay guide gives $1.25 to $2.50 for most projects. The table below is built from those published pieces and says so. To get a price on your brick, ask for a free estimate.

Minimum charges between $500 and $1,000 are common around Tampa Bay, so a small brick walk can price above the per-foot math. Old sealer to strip, stains and sunken pavers add cost too. To compare a bid with these ranges, call (727) 610-7187.

Step on a brick jobHow it is pricedLargo figure
Wash, joint sand and sealer togetherPer square foot$1.00 to $1.75 a sq ft (Largo page)
Same work across Tampa BayPer square foot$1.25 to $2.50 a sq ft (cost guide)
A 400 sq ft brick patio at the Largo rangeArithmetic on the per-foot range$400 to $700
A 1,000 sq ft brick drive at the Largo rangeArithmetic on the per-foot range$1,000 to $1,750
Small job minimumFlat charge$500 to $1,000 (cost guide)

No page gives a rate for brick alone. This table is built from the pieces that are published: the Largo per-foot range from Rusty's Pro Wash & Seal, its Tampa Bay range and the minimum charges in its cost guide. Stripping old sealer is not priced on any page used, and the Largo page only says it moves a job toward the high end.

Get a Free Estimate

Sand brushed into the joints of a brick paver walkway at a Largo yard
Why choose us

Why do older Largo yards need a closer look at the edges?

Many Largo homes are decades old. Wikipedia says the city grew as a bedroom community after the 1960s and counted 47,694 housing units in 2020, with a median age of 50.8 years. Older brick patios and walks have had many seasons of rain, roots and foot traffic. Steps, borders and tree-root bumps deserve a look before any coat is planned. To point out the spots you worry about, call (727) 610-7187.

Sealer cannot level a bump or tighten a loose paver. Premier Coatings says unstable joints invite weeds, ants and trip hazards, so a contractor tops up sand and flags repairs first. Ask for those repairs to be named on the estimate so the price covers them. To set that up, ask for a free estimate.

Why choose us

Why does white haze show up on brick?

Premier Coatings lists a whitish haze, called efflorescence, among the signs that it is time to reseal, and it says two or more signs mean clean, re-sand and reseal. Old sealer can also cloud, and Pro Paver Clean and Seal says white, cloudy pavers must be stripped before sealing. A contractor tells the two apart by testing a small area. Got a patch like that? Call (727) 610-7187 and describe it.

How long does a sealed brick surface last in Largo?

Expect two to five years. Premier Coatings says two to three years, with sun and salt spray pushing toward two. Rusty's says to expect two to four years from a professional seal and suggests resealing every two to three. Family Handyman says three to five years once the coat has worn, and warns that extra sealing adds no protection. To plan a date, ask for a free estimate.

Between coats, Premier says to rinse salt and organics off, aim sprinklers away and blow leaves off the brick. Those habits stretch the time between jobs. To ask about upkeep, call (727) 610-7187.

Questions

Frequently Asked Questions

Can you seal outdoor pavers?

Yes. Brick, concrete and stone pavers all take sealer, and Rusty's Pro Wash & Seal lists brick and travertine among the surfaces it seals in Largo. Brick can need a clay-formulated product, according to Rusty's Tampa Bay guide, so ask which sealer fits the paver you have.

How much does it cost to seal outdoor pavers?

A Largo company lists $1.00 to $1.75 per square foot, and its Tampa Bay guide shows most projects at $1.25 to $2.50. No page gives a separate brick rate. Small jobs can run into a $500 to $1,000 minimum charge.

How often should I seal pavers in Florida?

Every two to five years. Premier Coatings says brick pavers can handle Florida's climate better than poured concrete if they are cleaned, re-sanded and sealed on schedule, and it puts that schedule at two to three years in Pinellas County. Family Handyman says three to five once the old coat has worn.

What is the average cost to seal pavers in Florida?

Published figures vary with the area. Rusty's lists $1.00 to $1.75 per square foot in Largo and $1.25 to $2.50 around Tampa Bay, and it says large jobs can approach $1.00. A 1,000 square foot driveway runs $1,250 to $2,500 in its Tampa Bay guide.

Is clay brick different from concrete brick?

Yes. Wikipedia says clay brick is fired in a kiln, while concrete brick sets, and it calls concrete paving brick a porous form of brick. Because the two behave differently, a contractor should ask which one you have.

Will sealer make my brick pavers look wet?

Only with the finish that does that. Rusty's calls high gloss the wet look, and it lists natural, mid-gloss and gloss as lower sheens. Pro Paver Clean and Seal sells a sealer that is not glossy, which it says avoids milky white spots from trapped moisture.

What does white haze on brick mean?

Possibly efflorescence, a whitish haze that Premier Coatings lists as a sign of time to reseal, or old sealer that has clouded. Pro Paver Clean and Seal says white, cloudy pavers must be stripped first. A small test area shows which it is.

Does a brick paver patio need sand in the joints?

Yes. Wikipedia says interlocking pavers rely on friction from the joint sand to spread weight, and Paver Sealing Pinellas says sealing locks that sand in. Pro Paver Clean and Seal fills the joints to about an eighth to a quarter inch below the edge and says the sand should not look like grout.

How it works

How does the brick paver sealing process go from visit to finish?

Five stages carry a brick job from the first look to the last rinse. To set the first one, call (727) 610-7187.

1. Identify the brick

A contractor checks whether it is clay or concrete and notes its condition.

2. Clean and treat

Algae and stains are treated, rinsed away and left to dry.

3. Fill the joints

Sand goes in without looking like grout.

4. Seal

Sealer goes on in the sheen agreed at the visit.

5. Review

You see the result and hear when foot and vehicle traffic can return.

Photos

What do sealed brick pavers look like around Largo?

Freshly sealed paver driveway at a brick paver job in Largo
Sealed paver pool deck at a brick paver job in Largo
Sealed paver patio behind the home at a brick paver job in Largo
Sealed paver walkway to a front door at a brick paver job in Largo
Close view of freshly sealed pavers at a brick paver job in Largo
Paver area with one cleaned half beside a dirty half at a brick paver job in Largo
Contractor cleaning pavers at a brick paver job in Largo
Contractor sealing or sanding pavers at a brick paver job in Largo

Which other services does a brick surface sometimes need?

Brick that has stained, hazed or gone gray may need more than a coat. Pick a page below, or call (727) 610-7187.

Let a local contractor look at your brick pavers

Call or send the short form, and expect a reply within 1 business day, usually sooner.

Call (727) 610-7187

Free, no obligation